Bentley Continental 2018: typische Probleme
Bentley Continental 2018. Service-Bulletins des Herstellers für dieses Jahr: 107. Details nach Bauteil unten, mit Quellen.
Kennzahlen
- Technische Service-Bulletins (TSB)
- 107
Motoren und Getriebe
US-Versionen laut EPA. Rechts: wie viele NHTSA-Beschwerden diesen Motor oder Getriebetyp ausdrücklich nennen.
- 6 l · Benzin · Turbo · 12 Zyl.
- Automatik, 8 Gänge
Antrieb: Allrad (AWD)
Bauteile, über die sich Halter beschweren
| Bauteil | Halterbeschwerden | mit Unfall | Technische Service-Bulletins (TSB) |
|---|---|---|---|
| Elektrik | 0 | 0 | 63 |
| Ausstattung | 0 | 0 | 25 |
| Motor und Kühlung | 0 | 0 | 17 |
| Karosseriestruktur | 0 | 0 | 15 |
| Sicht | 0 | 0 | 10 |
| Fahrwerk | 0 | 0 | 9 |
| Räder | 0 | 0 | 7 |
| Schlösser und Verriegelungen | 0 | 0 | 6 |
| Betriebsbremse | 0 | 0 | 6 |
| Außenbeleuchtung | 0 | 0 | 5 |
| Lenkung | 0 | 0 | 5 |
| Kraftstoffanlage | 0 | 0 | 3 |
| Antriebsstrang | 0 | 0 | 2 |
| Airbags | 0 | 0 | 1 |
Vergleich
Was vor dem Kauf prüfen
- Elektrik. Alle Steuergeräte auslesen, Batterie und Lichtmaschine testen, Stecker nahe der Aufprallzone prüfen.
- Motor und Kühlung. Kühler und Lüfter nach Frontaufprall, Kühlmittelstand und -zustand, Überhitzung.
- Karosseriestruktur. Längsträger, Säulen, Spaltmaße, Spuren von Richten oder Schweißen.
- Sicht. Wischer, Spiegel, Entfroster, gesprungenes Glas.
Service-Bulletins des Herstellers
Titel der Bulletins im Original (Englisch), wie bei der NHTSA eingereicht.
- HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines
Customer statement / workshop findings: HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin Note: For this scenario please…
- 12 Volt - Battery condition checks. Customer statement / workshop findings
12 volt battery flat or unserviceable Technical background: For all 12 volt battery issues relating to warranty or a parts warranty claim refer to the instructions within the Measure section.
- Driver / Passenger door(s) creak on close - All models (front and / or rear)
Customer statement / workshop findings: Driver and / or Passenger door creak during the Power close function - Front and / or rear (Depending on vehicle type).
- Driver / Passenger door(s) creak on close - All models (frond and/or rear)
Customer statement / workshop findings: Driver and / or Passenger door creak during the Power close function - Front and / or rear (Depending on vehicle type) Technical background: Ensure the fault is as described…
- Spurious DTC identification. Customer statement / workshop findings
Customers will not be aware of any DTCs, workshop operatives may discover spurious DTCs whilst running Guided Fault Finding (GFF) when using ODIS Technical background: To determine the course of action which should be…
- HVAC distribution/operational issues - HVAC Motor defect DTCs logged. Customer statement / workshop findings
HVAC distribution/operational issues - HVAC motor defect (DTCs) evident within address 08 - Climatronic control unit, the DTCs can be static or Intermittent Technical background: Where VIN applicable the operative MUST…
- Engine Coolant Mixture - Restrictions on use of desalinated water Customer Statement
Engine coolant requires topping up or replacing
- Brake Noise Identification
Customer Statement: -Noise/squeal complaint from the braking system Technical Background: -The noise/squeal can be reproduced and clearly assigned to the braking system
- Tyre tread/sidewall crack(s) Customer Statement
Cracks evident in the sidewall and/or tread pattern (See the examples in Figures 1 and 2 showing cracks within the tread pattern)
- Road wheel inspection procedure Customer Statement
In the event a complaint is received regarding road wheel/s condition for example: - Scratches - Corrosion - Damage - Blemishes - Chipping Please refer to the onward instructions
- Telephone Functionality Complaint - Minimum Standards Required For Analysis Of Concerns
Customer statement / workshop findings: The feedback method within this TPI is required should a complaint of telephone functionality and/or quality be reported. Technical background: The minimum standards check list…
- Engine Lubricating Oil - Replenishment Customer Statement
Engine lubricating oil lamp illuminated on driver instrument panel. Engine lubricating oil requires topping up between services.
Die NHTSA führt 107 Bulletins für dieses Jahr; hier die 12 neuesten.
Andere Jahre dieses Modells
Fragen und Antworten
Was sind die häufigsten Probleme beim Bentley Continental 2018?
Für dieses Jahr gibt es keine Halterbeschwerden in den NHTSA-Daten; die Daten stammen aus 107 Service-Bulletins des Herstellers.
Wie viele Service-Bulletins (TSB) gibt es für den Bentley Continental 2018?
Die NHTSA führt 107 Service-Bulletins des Herstellers für dieses Jahr. Ein Bulletin sagt Händlern, wie ein bekanntes Problem diagnostiziert oder behoben wird; es ist kein Rückruf.
Lohnt sich ein Bentley Continental 2018 von einer US-Auktion?
Halterbeschwerden beschreiben Mängel, keine Unfallschäden. Prüfen Sie vor dem Gebot die oben genannten Bauteile und die Fotos des Loses: VinWind erstellt per VIN einen Bericht über sichtbare und versteckte Schäden.
Andere Modelle von 2018
Lesen Sie auch
Quellen: öffentliche NHTSA-Daten (USA) – Service-Bulletins und Halterbeschwerden; YouTube – Links zu Videos mit Nennung der Autoren. Beschwerden sind Aussagen der Halter, von der NHTSA nicht bestätigt, und betreffen Mängel, keine Unfallschäden. Daten aktualisiert am 2026-11-04.