B0022 code: Left Curtain Deployment Control 2
Code B0022 is named in 14 US owner complaints, 1 of them (7%) after a crash. Models: 10, model years 2005–2017.
What the code means
Left Curtain Deployment Control 2. Generic meaning per SAE J2012 (the same for all makes).
How to read B0022: the letter B means body (including airbags and belts); the second digit 0 marks a generic SAE code shared by all makes; the last three characters 022 identify the specific fault.
Restraint system codes: airbag squibs, belt pretensioners, crash sensors and occupant classification. After a crash with airbag deployment, many makers require the restraint module to be replaced or reset by procedure because it stores crash data. An airbag light on an auction car is not cosmetic: airbags, the module and sensors can cost more than the body repair.
Key figures
- Complaints with this code
- 14
- after a crash
- 1 (7%)
- Models
- 10
- Model years
- 2005–2017
Which models and years
Models whose owners name this code (10). Years link to the model year problems page.
Components named together with the code
Component as the owner filed it (one complaint can list several).
Complaints by model year
What to do if an auction car has this code
- Ask for a dash photo at start-up: the airbag light must go off after the self-test.
- Check the interior photos for deployed airbags and fired belt pretensioners: replacing the restraint module, airbags and sensors is a large separate part of the estimate.
- Budget a scan with a restraint module read-out: the code alone does not say which part failed.
What owners report
Excerpts of owner complaints in the original wording. Owner statements not verified by the regulator; personal data removed.
Despite the severity of the collision no airbags deployed and both front seatbelts failed. Error Codes: B0052:00 Deployment commanded; B0015:04 Driver seat belt buckle tensioner deployment loop open; B0022:04 Passenger seat belt buckle tensioner deployment loop open.
The contact stated that on several occasions while the vehicle was started, the message âService Air Bagsâ was displayed, and the red seat belt warning light was illuminated. The vehicle was taken to a dealer where it was diagnosed and DTC: B0014 and B0022 were retrieved.
Passenger restraint system failed, cost $600 repaired, with only 56,500 miles, it gave a code of B0022, and a service bulletin dtc B0022, safety issue with this code B0022 the seatbelt and air bags will not work in event of a collision, yes by a independent service center, serviced air bags messages and red seatbelt…
Related codes
- B0081First Row Center Seat Belt Load Limiter…
- B0020Left Side Airbag Deployment Control
- B00A0Occupant Classification System
- U0151Lost Communication With Restraints Control…
- B0074Second Row Center Seat Belt Pretensioner…
- U0170Lost Communication With Restraints System…
- B0001Driver Frontal Stage 1 Deployment Control
- B0028Right Side Airbag Deployment Control
- B0092Left Side Restraints Sensor 2
- B0021Left Curtain Deployment Control 1
Sources: public official US data (owner complaints) and the SAE J2012 standard. Complaints are owner statements not verified by the regulator. A code from a complaint does not replace a scan tool diagnosis. Data updated 2026-11-10.