B1701 code in owner complaints
Code B1701 is named in 11 US owner complaints, 1 of them (9%) after a crash. Models: 2, model years 2006–2007.
There is little data for this code or its meaning is ambiguous, so this page is not indexed.
What the code means
This is a manufacturer-specific code: the meaning depends on the make and sometimes on the year.
How to read B1701: the letter B means body (including airbags and belts); the second digit 1 marks a manufacturer code whose meaning is set by the make; the last three characters 701 identify the specific fault.
Restraint system codes: airbag squibs, belt pretensioners, crash sensors and occupant classification. After a crash with airbag deployment, many makers require the restraint module to be replaced or reset by procedure because it stores crash data. An airbag light on an auction car is not cosmetic: airbags, the module and sensors can cost more than the body repair.
Key figures
- Complaints with this code
- 11
- after a crash
- 1 (9%)
- Models
- 2
- Model years
- 2006–2007
Which models and years
Models whose owners name this code (2). Years link to the model year problems page.
Components named together with the code
Component as the owner filed it (one complaint can list several).
Complaints by model year
What to do if an auction car has this code
- Ask for a dash photo at start-up: the airbag light must go off after the self-test.
- Check the interior photos for deployed airbags and fired belt pretensioners: replacing the restraint module, airbags and sensors is a large separate part of the estimate.
- Budget a scan with a restraint module read-out: the code alone does not say which part failed.
What owners report
Excerpts of owner complaints in the original wording. Owner statements not verified by the regulator; personal data removed.
This first happened in 2010, when the mileage was 34089, and then again in 2011, when the mileage was 40356. The cause for this that was listed on the repair bill was, scan test found code B1701, buckle assembly open short. I was at the dealer for the same problem on 11/11/13, when my car's mileage was 57912.
I took the car in for a recall on the ocs and the dealer found two fault codes B1701 and B1706 indicating that both passenger and drivers side belt pretensioners resistance is too high.I see there are many 2006 and 2007 sonatas with a similar issue.
We took the car in for a recall on the ocs and the dealer found two fault codes B1701 and B1706 indicating that both passenger and drivers side belt pretensioners resistance is too high.I see there are many 2006 and 2007 sonatas with a similar issue. Dealer wants a total of 871.74.
Related codes
- B0081First Row Center Seat Belt Load Limiter…
- B0020Left Side Airbag Deployment Control
- B00A0Occupant Classification System
- U0151Lost Communication With Restraints Control…
- B0074Second Row Center Seat Belt Pretensioner…
- U0170Lost Communication With Restraints System…
- B0001Driver Frontal Stage 1 Deployment Control
- B0022Left Curtain Deployment Control 2
- B0028Right Side Airbag Deployment Control
- B0092Left Side Restraints Sensor 2
- B0021Left Curtain Deployment Control 1
Sources: public official US data (owner complaints) and the SAE J2012 standard. Complaints are owner statements not verified by the regulator. A code from a complaint does not replace a scan tool diagnosis. Data updated 2026-11-10.