B1706 code in owner complaints
Code B1706 is named in 28 US owner complaints. Models: 4, model years 2006–2007.
There is little data for this code or its meaning is ambiguous, so this page is not indexed.
What the code means
This is a manufacturer-specific code: the meaning depends on the make and sometimes on the year.
How to read B1706: the letter B means body (including airbags and belts); the second digit 1 marks a manufacturer code whose meaning is set by the make; the last three characters 706 identify the specific fault.
Restraint system codes: airbag squibs, belt pretensioners, crash sensors and occupant classification. After a crash with airbag deployment, many makers require the restraint module to be replaced or reset by procedure because it stores crash data. An airbag light on an auction car is not cosmetic: airbags, the module and sensors can cost more than the body repair.
Key figures
- Complaints with this code
- 28
- Models
- 4
- Model years
- 2006–2007
Which models and years
Models whose owners name this code (4). Years link to the model year problems page.
Components named together with the code
Component as the owner filed it (one complaint can list several).
Complaints by model year
What to do if an auction car has this code
- Ask for a dash photo at start-up: the airbag light must go off after the self-test.
- Check the interior photos for deployed airbags and fired belt pretensioners: replacing the restraint module, airbags and sensors is a large separate part of the estimate.
- Budget a scan with a restraint module read-out: the code alone does not say which part failed.
What owners report
Excerpts of owner complaints in the original wording. Owner statements not verified by the regulator; personal data removed.
Red âairbagâ light on dash illuminated while driving. Code read as B1706: passenger buckle pretensioner. May have been covered under Hyundaiâs 15yr/250k warranty but owners never notified since not official recall.
On that invoice it stated: check air bag system for codes B1701 and B1706 driver and passenger front seat belt buckle pretensioner resistance high found service bullentin 15be002 install tie strap on driver and passenger seat belt buckle pretensioner connectors.on june 22, 2015 I came in savannah hyundai once again…
Driving on an interstate the "air bag" light came on. Eventually diagnosed srs code B1706 "passenger buckle pretensioner resistance too high" advised air bag may not deploy properly or at all until repaired. On vacation at the time, not close to a dealer. Passenger seat belt system will have to be replaced.
Related codes
- B0081First Row Center Seat Belt Load Limiter…
- B0020Left Side Airbag Deployment Control
- B00A0Occupant Classification System
- U0151Lost Communication With Restraints Control…
- B0074Second Row Center Seat Belt Pretensioner…
- U0170Lost Communication With Restraints System…
- B0001Driver Frontal Stage 1 Deployment Control
- B0022Left Curtain Deployment Control 2
- B0028Right Side Airbag Deployment Control
- B0092Left Side Restraints Sensor 2
- B0021Left Curtain Deployment Control 1
Sources: public official US data (owner complaints) and the SAE J2012 standard. Complaints are owner statements not verified by the regulator. A code from a complaint does not replace a scan tool diagnosis. Data updated 2026-11-10.