C0020 code: ABS Pump Motor Control
Code C0020 is named in 302 US owner complaints, 1 of them (0%) after a crash. Models: 6, model years 2010–2025.
What the code means
ABS Pump Motor Control. Generic meaning per SAE J2012 (the same for all makes).
How to read C0020: the letter C means chassis (brakes, ABS, steering, suspension); the second digit 0 marks a generic SAE code shared by all makes; the last three characters 020 identify the specific fault.
ABS/ESC codes: wheel speed sensors, the ABS hydraulic unit and pump, brake booster, pressure and yaw sensors. A hit to a wheel or suspension often damages the wheel speed sensor or its wiring, so on a damaged car this code is a reason to inspect the hub, knuckle and control arms, not just swap the sensor.
Key figures
- Complaints with this code
- 302
- after a crash
- 1 (0%)
- Models
- 6
- Model years
- 2010–2025
Which models and years
Models whose owners name this code (6). Years link to the model year problems page.
Components named together with the code
Component as the owner filed it (one complaint can list several).
Complaints by model year
What to do if an auction car has this code
- Inspect the wheel and suspension on the impact side: the wheel speed sensor is often damaged together with the hub or knuckle.
- Check whether the ABS and ESC lights stay on after start-up.
- After replacing sensors or the hydraulic unit, bleeding and scan tool adaptation may be required.
What owners report
Excerpts of owner complaints in the original wording. Owner statements not verified by the regulator; personal data removed.
ABS system failure, recirculation pump failure, code C0020, Ran off road while ABS and traction control was off during wet conditions. Unsafe to drive due to safety failure on ABS.
I have not noticed a difference in normal braking performance. Diagnostic testing identified codes C2200-49 related to an internal ABS module electronic failure and C0020-01, ABS pump motor control/general electrical failure. I was advised that the ABS module and/or hydraulic control unit may require replacement.
Deputy driving the vehicle reported to Fleet of Little to no power brake assist. Fleet found ABS fault codes C0020:64:68 present and sent to the dealer. Dealer is reporting back of possible ABS HCU fault.
Related codes
- U0121Lost Communication With Anti-Lock Brake System…
- U0415Invalid Data Received From Anti-Lock Brake…
- U0416Invalid Data Received From Vehicle Dynamics…
- U0418Invalid Data Received From Brake System…
- C0561Vacuum Sensor A/B Correlation
- C0021Brake Booster Performance
- C0063Yaw Rate Sensor
- C0040Brake Pedal Switch A
- C006CStability System
Sources: public official US data (owner complaints) and the SAE J2012 standard. Complaints are owner statements not verified by the regulator. A code from a complaint does not replace a scan tool diagnosis. Data updated 2026-11-10.