C0040 code: Brake Pedal Switch A
Code C0040 is named in 11 US owner complaints, 1 of them (9%) after a crash. Models: 8, model years 2004–2023.
What the code means
Brake Pedal Switch A. Generic meaning per SAE J2012 (the same for all makes).
How to read C0040: the letter C means chassis (brakes, ABS, steering, suspension); the second digit 0 marks a generic SAE code shared by all makes; the last three characters 040 identify the specific fault.
ABS/ESC codes: wheel speed sensors, the ABS hydraulic unit and pump, brake booster, pressure and yaw sensors. A hit to a wheel or suspension often damages the wheel speed sensor or its wiring, so on a damaged car this code is a reason to inspect the hub, knuckle and control arms, not just swap the sensor.
Key figures
- Complaints with this code
- 11
- after a crash
- 1 (9%)
- Models
- 8
- Model years
- 2004–2023
Which models and years
Models whose owners name this code (8). Years link to the model year problems page.
Components named together with the code
Component as the owner filed it (one complaint can list several).
Complaints by model year
What to do if an auction car has this code
- Inspect the wheel and suspension on the impact side: the wheel speed sensor is often damaged together with the hub or knuckle.
- Check whether the ABS and ESC lights stay on after start-up.
- After replacing sensors or the hydraulic unit, bleeding and scan tool adaptation may be required.
What owners report
Excerpts of owner complaints in the original wording. Owner statements not verified by the regulator; personal data removed.
ABS, TC, Service ESC, Service 4WD, Reduced Steering Assist. OBD2 Codes: C0040, U0414, U0121 populated. There is a short in the Electronic Brake Control Monitor, a part that should last way more than 3 years and 33k miles. $1300 to remove and replace EBCM.
I took it back to the dealer and was told 3 other things was wrong with the car. Code-C0040-62 Brake lamp switch failure stuck. U3000-49 Multi purpose camerawave radar internal electronic failure. B2A60-97. Tech reset camera and the system still gave failure codes.
There were no warning indicators illuminated. The vehicle was taken to an independent mechanic where the following diagnostic codes appeared: C0035, C0040, C0050, uo077, U0126, uo151, uo422, uo401 and uo415. The vehicle was not repaired.
Related codes
- C0020ABS Pump Motor Control
- U0121Lost Communication With Anti-Lock Brake System…
- U0415Invalid Data Received From Anti-Lock Brake…
- U0416Invalid Data Received From Vehicle Dynamics…
- U0418Invalid Data Received From Brake System…
- C0561Vacuum Sensor A/B Correlation
- C0021Brake Booster Performance
- C0063Yaw Rate Sensor
- C006CStability System
Sources: public official US data (owner complaints) and the SAE J2012 standard. Complaints are owner statements not verified by the regulator. A code from a complaint does not replace a scan tool diagnosis. Data updated 2026-11-10.