C0561 code: Vacuum Sensor A/B Correlation
Code C0561 is named in 14 US owner complaints. Models: 8, model years 2007–2013.
What the code means
Vacuum Sensor A/B Correlation. Generic meaning per SAE J2012 (the same for all makes).
How to read C0561: the letter C means chassis (brakes, ABS, steering, suspension); the second digit 0 marks a generic SAE code shared by all makes; the last three characters 561 identify the specific fault.
ABS/ESC codes: wheel speed sensors, the ABS hydraulic unit and pump, brake booster, pressure and yaw sensors. A hit to a wheel or suspension often damages the wheel speed sensor or its wiring, so on a damaged car this code is a reason to inspect the hub, knuckle and control arms, not just swap the sensor.
Key figures
- Complaints with this code
- 14
- Models
- 8
- Model years
- 2007–2013
Which models and years
Models whose owners name this code (8). Years link to the model year problems page.
Components named together with the code
Component as the owner filed it (one complaint can list several).
Complaints by model year
What to do if an auction car has this code
- Inspect the wheel and suspension on the impact side: the wheel speed sensor is often damaged together with the hub or knuckle.
- Check whether the ABS and ESC lights stay on after start-up.
- After replacing sensors or the hydraulic unit, bleeding and scan tool adaptation may be required.
What owners report
Excerpts of owner complaints in the original wording. Owner statements not verified by the regulator; personal data removed.
Gm still does not support and take responsibility for this issue -pulled the codes. The recent ones I've gotten are: C0899, C0561, P0017, P0011 last time this happened, it cost me over $1500 to replace all of the fuses/wiring. I am frustrated, yes. No, I don't have the money to fix this yet again.
Several hours later, the check engine light remained on, but the car drove normally -- straight to the repair shop, where it was deemed to need $2400 in transmission repair due to the following fault codes: P182E & C0561. They will replace the transmission mode shift sensor and the transmission control module.
Started car up and message center flashes power steering, service esc. I get codes U2143, C0561 on scanner . Total loss of steering assist. This car is not part of recall on steering problem but it should be!
Related codes
- C0020ABS Pump Motor Control
- U0121Lost Communication With Anti-Lock Brake System…
- U0415Invalid Data Received From Anti-Lock Brake…
- U0416Invalid Data Received From Vehicle Dynamics…
- U0418Invalid Data Received From Brake System…
- C0021Brake Booster Performance
- C0063Yaw Rate Sensor
- C0040Brake Pedal Switch A
- C006CStability System
Sources: public official US data (owner complaints) and the SAE J2012 standard. Complaints are owner statements not verified by the regulator. A code from a complaint does not replace a scan tool diagnosis. Data updated 2026-11-10.