U1262 code in owner complaints
Code U1262 is named in 8 US owner complaints. Models: 2, model years 2001–2003.
There is little data for this code or its meaning is ambiguous, so this page is not indexed.
What the code means
This is a manufacturer-specific code: the meaning depends on the make and sometimes on the year.
How to read U1262: the letter U means network communication between modules; the second digit 1 marks a manufacturer code whose meaning is set by the make; the last three characters 262 identify the specific fault.
ABS/ESC codes: wheel speed sensors, the ABS hydraulic unit and pump, brake booster, pressure and yaw sensors. A hit to a wheel or suspension often damages the wheel speed sensor or its wiring, so on a damaged car this code is a reason to inspect the hub, knuckle and control arms, not just swap the sensor.
Key figures
- Complaints with this code
- 8
- Models
- 2
- Model years
- 2001–2003
Which models and years
Models whose owners name this code (2). Years link to the model year problems page.
Components named together with the code
Component as the owner filed it (one complaint can list several).
Complaints by model year
What to do if an auction car has this code
- Inspect the wheel and suspension on the impact side: the wheel speed sensor is often damaged together with the hub or knuckle.
- Check whether the ABS and ESC lights stay on after start-up.
- After replacing sensors or the hydraulic unit, bleeding and scan tool adaptation may be required.
What owners report
Excerpts of owner complaints in the original wording. Owner statements not verified by the regulator; personal data removed.
Yellow air bag light comes on weekly. Took to ford dealer 10/1/11, found codes C1185, 1198, 1194, 1254, 1246, 1250, 1248, 1214, 1210, B1869, B1470, U1262, B1676, B1246. Internal module failure, recommend replacing ecu (verbally quoted $1,000 over the phone).
Upon an internet search, it was recommended to forward such problems to nhtsa for documentation. The following codes were retrieved from the windstar: C1185 and U1262. It appears that the abs control module will need to be replaced.
I had the electronic hydraulic controlunit scanned for error codes and it was determined that the above reference electronic hydraulic control unit was defective. The error codes were C1185, C1233, C1235, C1236, U1262, C1446.
Related codes
- C0020ABS Pump Motor Control
- U0121Lost Communication With Anti-Lock Brake System…
- U0415Invalid Data Received From Anti-Lock Brake…
- U0416Invalid Data Received From Vehicle Dynamics…
- U0418Invalid Data Received From Brake System…
- C0561Vacuum Sensor A/B Correlation
- C0021Brake Booster Performance
- C0063Yaw Rate Sensor
- C0040Brake Pedal Switch A
- C006CStability System
Sources: public official US data (owner complaints) and the SAE J2012 standard. Complaints are owner statements not verified by the regulator. A code from a complaint does not replace a scan tool diagnosis. Data updated 2026-11-10.