B1018 code in owner complaints
Code B1018 is named in 82 US owner complaints. Models: 14, model years 2007–2014.
There is little data for this code or its meaning is ambiguous, so this page is not indexed.
What the code means
This is a manufacturer-specific code: the meaning depends on the make and sometimes on the year.
How to read B1018: the letter B means body (including airbags and belts); the second digit 1 marks a manufacturer code whose meaning is set by the make; the last three characters 018 identify the specific fault.
Restraint system codes: airbag squibs, belt pretensioners, crash sensors and occupant classification. After a crash with airbag deployment, many makers require the restraint module to be replaced or reset by procedure because it stores crash data. An airbag light on an auction car is not cosmetic: airbags, the module and sensors can cost more than the body repair.
Key figures
- Complaints with this code
- 82
- Models
- 14
- Model years
- 2007–2014
Which models and years
Models whose owners name this code (14). Years link to the model year problems page.
| Model | Years | Complaints |
|---|---|---|
| Infiniti G37 | 2009, 2010, 2011, 2012 | 16 |
| Nissan Rogue | 2008, 2009, 2010, 2011, 2012, 2013, 2014 | 16 |
| Nissan Leaf | 2011, 2012 | 15 |
| Nissan Murano | 2009, 2010, 2011, 2012 | 12 |
| Nissan Altima | 2008, 2009, 2012 | 6 |
| Infiniti G35 | 2008 | 4 |
| Nissan Maxima | 2008, 2009, 2014 | 4 |
| Infiniti G25 | 2011, 2012 | 2 |
| Nissan 370Z | 2010 | 2 |
| Infiniti EX35 | 2012 | 1 |
| Infiniti M35 | 2008 | 1 |
| Nissan 350Z | 2007 | 1 |
| Nissan GT-R | 2010 | 1 |
| Nissan Sentra | 2008 | 1 |
Components named together with the code
Component as the owner filed it (one complaint can list several).
Complaints by model year
What to do if an auction car has this code
- Ask for a dash photo at start-up: the airbag light must go off after the self-test.
- Check the interior photos for deployed airbags and fired belt pretensioners: replacing the restraint module, airbags and sensors is a large separate part of the estimate.
- Budget a scan with a restraint module read-out: the code alone does not say which part failed.
What owners report
Excerpts of owner complaints in the original wording. Owner statements not verified by the regulator; personal data removed.
They hooked up to it and discovered the issue. They said the code was B1018 (OCS), air bag... They gave me a recall notice that detailed the issue, and said that the dealership would repair this for free. The NHTSA #/Campaign ID# says it includes B8242 (Murano, Rogue, 350Z).
Car throws a B1018 DTC, which is for the passenger seat occupancy sensor. The seat occupancy sensor failing poses a major safety risk, as it causes the airbags to not deploy properly in the event of a crash.
2012 Infiniti G25x: Occupancy sensor failed (diagnostic code B1018) around 132,000 miles. This is a common problem with Infiniti cars. Apparently for 2007 and 2008, there were recalls, but this problem continued into later years with no recall.
Related codes
- B0081First Row Center Seat Belt Load Limiter…
- B0020Left Side Airbag Deployment Control
- B00A0Occupant Classification System
- U0151Lost Communication With Restraints Control…
- B0074Second Row Center Seat Belt Pretensioner…
- U0170Lost Communication With Restraints System…
- B0001Driver Frontal Stage 1 Deployment Control
- B0022Left Curtain Deployment Control 2
- B0028Right Side Airbag Deployment Control
- B0092Left Side Restraints Sensor 2
- B0021Left Curtain Deployment Control 1
Sources: public official US data (owner complaints) and the SAE J2012 standard. Complaints are owner statements not verified by the regulator. A code from a complaint does not replace a scan tool diagnosis. Data updated 2026-11-10.