C003A code: Right Rear Wheel Speed Sensor
Code C003A is named in 6 US owner complaints. Models: 5, model years 2012–2020.
What the code means
Right Rear Wheel Speed Sensor. Generic meaning per SAE J2012 (the same for all makes).
How to read C003A: the letter C means chassis (brakes, ABS, steering, suspension); the second digit 0 marks a generic SAE code shared by all makes; the last three characters 03A identify the specific fault.
ABS/ESC codes: wheel speed sensors, the ABS hydraulic unit and pump, brake booster, pressure and yaw sensors. A hit to a wheel or suspension often damages the wheel speed sensor or its wiring, so on a damaged car this code is a reason to inspect the hub, knuckle and control arms, not just swap the sensor.
Key figures
- Complaints with this code
- 6
- Models
- 5
- Model years
- 2012–2020
Which models and years
Models whose owners name this code (5). Years link to the model year problems page.
Components named together with the code
Component as the owner filed it (one complaint can list several).
Complaints by model year
What to do if an auction car has this code
- Inspect the wheel and suspension on the impact side: the wheel speed sensor is often damaged together with the hub or knuckle.
- Check whether the ABS and ESC lights stay on after start-up.
- After replacing sensors or the hydraulic unit, bleeding and scan tool adaptation may be required.
What owners report
Excerpts of owner complaints in the original wording. Owner statements not verified by the regulator; personal data removed.
Initially I replaced the battery with no resolution of the issue. I later discovered maintenance code displayed by the vehicle was C003A-62 for Right Rear Wheel Speed Sensor Circuit Failur
Same dash lights came on. Odbii code was C003A ('right rear wheel sensor'). I was able to nurse the unit home, but it did have the same problem after left turns a couple of times.
-7/5 - ~4:00pm - car fixed. Indicated "abs module dtcs C0037-62.C003A-62 and C121C-00. Found engine wrre harness connector c102 loose. Reinstalled connector c102. Cleared all codes. Performed extended road test. Verify okay." -7/6 ~12pm - received recall notice in mail. Safety recall m10/nhtsa 12v-197 abs/esc wiring.
Related codes
- C0020ABS Pump Motor Control
- U0121Lost Communication With Anti-Lock Brake System…
- U0415Invalid Data Received From Anti-Lock Brake…
- U0416Invalid Data Received From Vehicle Dynamics…
- U0418Invalid Data Received From Brake System…
- C0561Vacuum Sensor A/B Correlation
- C0021Brake Booster Performance
- C0063Yaw Rate Sensor
- C0040Brake Pedal Switch A
- C006CStability System
Sources: public official US data (owner complaints) and the SAE J2012 standard. Complaints are owner statements not verified by the regulator. A code from a complaint does not replace a scan tool diagnosis. Data updated 2026-11-10.